Collection: School & Classrooms

For new school buildings and significant refurbishments, yes — BB93 (Acoustics of Schools: a design guide) is referenced by the Building Regulations and is mandatory. For existing schools doing piecemeal acoustic improvements, BB93 isn't strictly enforced retrospectively, but it remains the recognised UK standard and is what most schools, academies and local authorities aim for when specifying treatment. BB93 sets specific reverberation time limits — 0.6 seconds for standard classrooms, 0.8 seconds for larger teaching spaces, 1.0 seconds for sports halls, 1.5 seconds for swimming pools — alongside ambient noise level limits and sound insulation requirements. If your project requires formal BB93 compliance certification, our sister company Resonics carries out acoustic surveys and certifies installations to meet these standards.

Most classrooms combine the worst possible acoustic ingredients: hard plastered walls, large windows, vinyl or tiled flooring, and a flat ceiling — all reflective surfaces. With minimal soft furnishings, sound bounces between these surfaces for 1-2 seconds before fading, well above the BB93 limit of 0.6 seconds. The result is reduced speech intelligibility, increased background noise, and the documented effect that significant proportions of what teachers say genuinely doesn't reach students at the back of the room.

No. Acoustic panels absorb sound within the room to reduce echo and reverberation. They don't block sound transmission between rooms or from outside. If your problem is noise from a neighbouring classroom or corridor, that's a soundproofing problem requiring different solutions (acoustic plasterboard, resilient bars, sealed doors). BB93 covers both reverberation control and sound insulation between spaces — the two need different treatments.

For a standard classroom (around 50-60m²), expect to spend £1,500–£3,500 on materials for treatment that brings reverberation into the BB93 target range. This typically means a combination of ceiling rafts and wall panels at the rear of the room. Larger spaces — assembly halls, dining halls, sports halls — scale up significantly: £5,000–£15,000+ depending on volume. Our acoustic calculator gives a tailored material list for your specific space.

Almost immediately — usually on the first day of teaching after installation. A typical untreated classroom has a reverberation time of 0.9-1.2 seconds, well above the BB93 limit. Bringing that down to 0.5-0.6 seconds — the BB93 target range — produces a dramatic improvement that teachers describe as "the room finally sounds calm." Vocal strain on staff drops noticeably, students at the back can hear instructions clearly, and the persistent low-level chaos that comes from echo simply stops.

For a standard classroom, 25-35% coverage of total wall and ceiling area typically brings reverberation into the BB93 target range. BB93 specifically recommends sound-absorbing material on the rear wall and ceiling as priority surfaces — these have the biggest impact on speech intelligibility. For a 60m² classroom, that's roughly 15-20m² of panels. The acoustic calculator gives a precise figure based on your specific room.

Yes. Several products in our range are specifically designed for educational environments — including SilentSpace impact-resistant panels and Ecophon's Akusto and Master ranges. These are tested for daily use in busy learning spaces and stand up to the occasional ball strike, displaced furniture or general wear and tear. For sports halls and PE areas, we recommend products rated for ball-strike resistance specifically.

Yes. Panels are available in 25+ stock fabric and PET felt colours, plus printable options that can carry school logos, educational graphics, house colours, or visual learning aids. Many schools use the rear classroom wall as a printed acoustic feature — improving sound quality and reinforcing identity. Lead times for custom prints are typically 6-10 weeks; stocked colours ship in 2-3 weeks

Yes. Every panel we sell carries a UK/EU fire classification suitable for educational buildings — typically Euroclass B-s1,d0 or higher under BS EN 13501-1. School and local authority specifications often require specific Euroclass ratings; certification documents are available for any project. Materials are non-toxic and low-VOC, suitable for use around children.