Collection: Worship Spaces and Churches

Churches were historically designed with long reverberation times — ideal for unaccompanied choral music and organ, where the sustained sound creates warmth and presence. The problem comes when the same space is used for sermons, modern worship bands, or community events: speech becomes muddy, amplified music distorts, and congregations strain to follow. Hard stone, plaster, glass and timber surfaces all reflect sound rather than absorbing it.

Not if it's done properly. Most churches don't need or want a "dead" acoustic — the goal is usually to bring reverberation down to a level where speech is intelligible while keeping enough warmth for music. A typical target is 1.5–2 seconds RT60, down from the 4–6 seconds many untreated churches have. Targeted treatment of reflective surfaces — typically the rear wall and any large flat surfaces — preserves the building's musical quality while solving the speech problem.

The most effective locations are usually the rear wall (which causes the most problematic reflections back to the congregation), large flat side walls, and the ceiling above the nave for very tall spaces. Areas behind pews, on dado-height walls, and under balconies are also useful. Listed and heritage buildings often need careful consultation — happy to advise on what's possible without compromising the building's character.

Often yes, but listed building consent is usually required. Reversible installation (panels that can be removed without damaging the substrate) is typically what heritage officers want to see. We've supplied projects in Grade I and Grade II listed churches across the UK — our sister company Resonics can liaise with conservation officers and design fully reversible installations.

The aim of acoustic treatment in a church is balance, not deadening. Targeted treatment of speech-frequency reflections (mid-to-high frequencies) leaves lower frequencies — the warmth of organ pedals and choral bass — largely untouched. A well-designed installation makes sermons intelligible while preserving musical resonance. For churches with an active music programme, we'll usually recommend a survey before installation.

For a small parish church (50–100 capacity), expect £2,000–£4,000 on materials. Larger churches and cathedrals naturally cost more — typically £5,000–£15,000+ for medium parish churches, and bespoke quotations for cathedral-scale spaces. Many churches treat their acoustic project as a phased capital improvement, starting with the rear wall and adding more as funds allow.

For most products, yes. Lightweight wall panels can be fitted with adhesive or simple mechanical fixings — no specialist tools needed. Suspended ceiling panels and baffles in larger churches usually need access equipment (scaffolding or scissor lift) and are better handled by professional installers. We can advise on which products in our range suit volunteer installation.

Yes. Many panels have UK/EU fire classification suitable for places of worship — typically Euroclass B-s1,d0 or higher under BS EN 13501-1. Some heritage buildings have specific local requirements; we'll happily provide certification documents to support listed building or insurance applications.